HOW TO TAKE IMPRESSION:

Step 1 : Get the impression tray and stand in front of a mirror.

Step 2 : Open 1x catalyst & 1x base.

Step 3 : Use Fingers to knead the impression material, until a uniform colour within 30 sec.

Step 4 : Roll putty into the shape of a log and load evenly onto the tray.

Step 5 : Align the tray centre groove to the centre of your teeth, press gently, making sure it goes above the gumline,  AVOID BITING DOWN!

Step 6 : Let it rest for approximately 3min

Step 7 : Open your mouth and shuffle impression, side to side to get it  out.

Step 8 : Twist and remove syringe cap, replace nozzle with the mixing head, twist to lock.

Step 9 : Steadily squeeze a small amount of the light body syringe mix, into the bottom, of each tooth you will be ordering.

[spend no more than 30 seconds doing this part, to avoid it setting]

Step 10 : Place tray back into your mouth, ensure all teeth are back in it’s original place.

[Keep it air tight, by apply pressure on the base of the tray with your thumbs]

Step 11 : Hold in position for approx 3mins, until set.

Step 12 : Open your mouth and shuffle impression, side to side to remove.

>>> Repeat procedure for remaining trays.<<<

tips....tips....tips

 Do not worry if the first impression comes out to be wrong.

You can purchase additional impression materials, if needed to get your accurate impression completed with us.